When crystallization problems occur in glass bottles, it is necessary to consider the furnace temperature and ingredient issues, improve the temperature regulation in the melting workshop, and strictly manage the ingredients.

Reason for crystallization:

(1) The material method is unreasonable or the batch does not meet the quality standards

⑵ Improper control of kiln temperature system

Improper control of kiln pressure and flame characteristics

Solution:

(1) Improve the material recipe or batch operation procedures to ensure the quality of the batch

⑵ The temperature system, pressure, and flame of the kiln should be adjusted reasonably and maintained stable

⑶ Reasonably adjust the temperature of the feeding channel to avoid the crystallization temperature range as much as possible

The connecting equipment between the glass bottle melting workshop and the production workshop is the feeding machine. If the feeding machine experiences equipment aging, looseness, etc., it is easy to produce scissors marks, which can affect the quality of the glass bottle

Scissor printing: Reason: Feeding machine

⑴ Dropping temperature too low or too high

⑵ The scissors are pressed too loosely or too tightly

⑶ There is too much oil dirt accumulated on the scissors

(4) Scissors spray too much or too little water

(5) The cutting edge of the scissors is poorly ground, used for too long, or deformed

Solution:

(1) Adjust the drop temperature and maintain stability

⑵ Adjust the shape of the material droplet or professional information of the droplet center

(3) The tightness and crossing degree of the scissors should be appropriate

(4) It is necessary to replace scissors with sharp sharpened edges and flat edges on time

(5) The amount of water sprayed by scissors, atomization, and timing should be adjusted appropriately